CHEROKEE is the evolution of the GERONIMO 2 model, which exploits its basic characteristics with many new technical contributions which, while maintaining the traditional qualities of Cressi rifles in terms of strength and ergonomics, adopts cutting-edge technical solutions, in many cases exclusive. HANDLE New handle, evolution of the one used in the GERONIMO model, with various reinforcements and anatomical changes to improve grip, maneuverability and resistance to flexion. Oversized and reinforced trigger protection arch and trigger in line with the barrel to eliminate the moment of inertia at the moment of the shot. Integrated rotating safety device operated with the thumb. New integrated rubber load support. Rod attachment point set back 5 cm to optimize the dynamic propulsion of the elastics and extend it over a longer length of the barrel. Assembly with reinforced and simplified barrel to cancel the bending at this point. It integrates a new particularly robust and reliable hooking system for the reel. Rounded fins to position the line in the winding process and prevent them from interfering in the hooking of the spinner. MECHANISM New metal mechanism developed 100% by Cressi Italia. It combines stainless steel elements with exclusive self-lubricating Teflon components to minimize friction. It achieves an extraordinary balance between trigger sensitivity and resistance to accidental release even by using powerful double elastic bands. Side retractable stainless steel line release. DRUM Stem Ø28 mm in anticorodal aluminum derived from the MOICANO model. Integrated low-friction rod guide as the rod is only supported on the two outer corners. Reinforced lower area with increased thickness. This combination means that the rifle maintains extraordinary maneuverability, while enjoying greater rigidity than rifles with a much larger diameter. HEAD Head Open minimalist but very robust, it allows to use double elastic bands. The cobra head design attenuates the angle of the elastics so that they work more effectively and without unnecessary friction or tension that limit their durability. It is designed so that, if double elastic bands are used, the action of both is complementary without any kind of interference. The head includes a new stainless steel line guide in the lower part which also acts as a line release if the double pass is used. ELASTICS Ø17 mm pure USA latex elastics with articulated shell as standard. Possibility of mounting with double rubber. AUCTION 6.5 mm rod with fins. Steel 16 4PH hardened and burnished. SIZES 75, 90, 100, 100, 110 cm. The measurements indicated correspond to the maximum distance of a loaded tire, i.e. from the head hole to the most delayed loading point. This measurement system is considered the most logical to calibrate the size of the tires to be used in rifles with delayed mechanism.
- cressi sub cerokee
- 60 cm